|
Rider |
Scene Equipment: Bass Combo- 1 (Trace-Elliot, Fender) 1/3 Octave EQ modules for each monitor group . All in all 4 separate monitor groups. 1 keyboards stand , 3 guitar stands. D. box- 2 (for an acoustic guitar, bass guitar, keyboards commutation), ? MonoJacks- 2 2 microphones with stands to sound guitar combos, 8 microphones with stands for drums, 4 vocal microphones with stands, 1 microphone with a stand for an accordion. Drum set ( bass drum, tom 1, tom 2, floor tom, snare drum stand, hi-hat stand, 4 cymbal stands, seat for a drummer) The amount of monitors at the scene can be increased only in case of insufficient speaker power or big scene sizes. The amount of monitor groups is retained. Technical Rider a) Vocal microphone (SHURE SM 58) supplied with a stand (‘crane’) and a cord (canon). The length of the cord corresponds to the width of the scene (from edge to edge). b) Acoustic guitar. Direct box with jack input is in the proscenium between the monitors. c) Electric guitar. Guitar combo (MARSHALL, FENDER, MESSA BOOGIE) is minimum 3 metres deep from the vocal monitor. Reproduced by a combo microphone. Free sockets (220 V) are behind the combo (for radiosystem). 2) Keyboards and Accordion (K. Adylin). On the right side from the lead vocals. a) Two-tiered keyboard stand, 3 sockets (220 V), is taken by 2 stereo-pairs (4 mono-jacks). b) Vocal microphone on a stand (‘crane’) c) Accordion is reproduced from a microphone fixed on the instrument, or from a microphone on a stand. 3) Bass Guitar (K. Smirnov) On the left side from the lead vocals. a) Voc al microphone on a stand (‘crane’) b) Bass combo (FENDER BXR-300, HARTKE SYSTEM, AMPEG, TRACE ELLIOT). Socket (220 V) is behind the combo (for radiosystem). Bass is taken through a line input . The availability of a direct box is preferable (the sound comes into the direct box, then to the console, and into the combo input.)
4) Drums (I. Lazarev) In the middle of the scene, behind the lead vocals (minimum 3 metres). a) Drum-podium is at least 2,5 m long, 2,5 m wide, 50 cm high. To prevent sliding, there is a rug under the drums. b) Drum set consists of buss drum, toms 1 and 2, floor tom, 4 cymbal stands, hi-hat stand, stare drum stand, and seat. The set is reproduced by 8 microphones: 1) Buss drum 5) Saxophone (A. Repyuk) On the right side from the lead vocals, accompanied with a stand (‘snare) with a carefully put/fixed microphone. FOH console must have at least 24 channels + FX return. Availability of a 1/3 Octave EQ on Master Output is required. 1 SM58 microphone with a cable, 2 FX Processors (Lexicon or similar to that), 1 delay line (Roland or similar to that) are required. All the necessary amount of dynamic handling is listed in the Patch List |